Textured Cube Surface texture pattern wallpaper
Reference: P10674The image features a textured surface resembling interlocking cubes in varying depths. This unique arrangement creates a striking visual effect, combining elegance and modernity. The gray tones enhance the three-dimensional appearance, making it a sophisticated addition to contemporary interiors.
Transform your space with our Textured Cube Surface texture pattern wallpaper, featuring an exquisite grey geometric design that captivates the eye. This stunning panel showcases a 3D surface texture that adds depth and character to any wall. Perfect for modern interiors, it combines elegance with a contemporary flair!
Why this product should be used for decoration
The Textured Cube Surface texture pattern wallpaper is an excellent choice for those seeking to elevate their home décor. Its unique design not only enhances the aesthetic appeal of your space but also creates a cozy and inviting atmosphere. Imagine the compliments you’ll receive from guests as they admire the distinctive geometric pattern that defines your walls!
How to apply this product
Applying the Textured Cube Surface texture pattern wallpaper is simple and straightforward. Just use glue on the wall, and with the help of a roller, brush, and cutter, you’ll transform your space in no time!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.