Multicolor Polka polka dots wallpaper
Reference: P8031A vibrant multicolor polka dot pattern spreads across the surface, creating a playful and dynamic visual texture.
The Multicolor Polka polka dots wallpaper features a delightful and charming design, with a playful combination of polka dots in pastel colors. The pattern is vibrant and eye-catching, adding a touch of whimsy and personality to any space. This non-woven wallpaper is manufactured in matt colours, ensuring a smooth and elegant finish. Applying the wallpaper is a breeze, requiring only glue, a roller, brush and cutter. It's easy to clean with a damp cloth and neutral soap, making it perfect for high-traffic areas. With a durability of 10-15 years, this wallpaper is a long-lasting and cost-effective choice for any room. Additionally, it has an M2 reaction to fire certification, ensuring safety and peace of mind. Whether used to create an accent wall or to decorate an entire room, the Multicolor Polka polka dots wallpaper is a versatile and stylish choice for any home!
Why this product should be used for decoration
The Multicolor Polka polka dots wallpaper is the perfect choice for adding a pop of color and personality to any space. Its vibrant and playful design instantly uplifts the atmosphere of a room, making it a standout feature in any home. Whether used in a nursery, bedroom, or living area, this wallpaper creates a cheerful and inviting ambiance that is sure to impress.
How to apply this product
Applying the Multicolor Polka polka dots wallpaper is a simple and straightforward process. Begin by preparing the wall surface, then apply the glue evenly using a roller. Next, carefully place the wallpaper on the wall, using a brush to smooth out any air bubbles. Finally, use a cutter to trim any excess paper for a seamless finish. The result is a stunning and vibrant wall that adds character and charm to any room.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.