Tall canopy design tree roller blind
Reference: E4112A breathtaking view of tall trees, captured from below, showcasing their expansive canopy filled with vibrant green leaves. The striking trunks rise majestically, creating a natural artwork that draws the eye upward, inviting a sense of tranquility and connection with nature.
Introducing our stunning Tall canopy design tree roller blind, a beautiful blend of forest imagery and artistic flair. Featuring a captivating watercolour painting of tall trees in vibrant shades of green, this design brings the serenity of nature into your home, creating an inviting and tranquil atmosphere.
Why this product should be used for decoration
The Tall canopy design tree roller blind transforms any space into a peaceful haven. Its enchanting design not only enhances your decor but also inspires relaxation and creativity. Imagine waking up to the calming essence of nature each day, allowing this roller blind to be your daily retreat from the hustle and bustle of life!
How to install this product
Installing the Tall canopy design tree roller blind is a breeze! With easy assembly in just two clicks, you can quickly elevate your room's aesthetic without hassle. Enjoy the beautiful view while keeping your space stylish and functional!
THERMAL INSULATION - Reduces cold enter
PRIVACY - Allows you to see without being seen
SAFETY - Protects from the sun's rays
ACOUSTIC INSULATION - Reduces the transfer of noise
CUSTOMISABLE SIZES - 100% made to measure
EASY PLACEMENT - On the wall or ceiling
EASILY CLEANED - With damp cloth and neutral soap
Custom roller blinds are a modern and inexpensive alternative to decorate any window. The installation and assembly of Tensticker blinds is very easy, you can do it yourself without investing too much effort and time. Please note that our blinds come fully assembled and only require installation of the brackets.
RECOMMENDED MATERIAL1. Ruler and carpenters ruler.
2. Spirit level
3. Drill to make fixing holes.
4. Hammer and screwdriver
5. Screws and dowels for fixing the blind support.
INSTALLATIONBefore installing the blinds, keep in mind that you must use dowels and screws appropriate to the chosen surface and place of instalation. Make sure to leave enough room to avoid the blinds getting in the way of the window handles when the blinds are up. You must also take into account the position of the furniture and radiators. Finally, remember to measure the same distance on both sides of the window:
1. Choose the location and position of the supports and mark with a pencil the points where the two blind supports will be joined with a screw, taking into account the measurements indicated above. With the help of a tape measure, a long ruler or a strip and a spirit level mark both points, so that both supports are completely straight. Leave enough room to open the window when the blind is up.
2. Drill the holes for the dowels. Once you have drilled the holes with the corresponding drill bit, insert the plugs into the wall with the help of a hammer and screw the two brackets into the wall, in the corresponding holes.
3. Finally, insert the roller blind into the respective notches of each bracket. This mechanism is very easy to assemble, and allows you to remove or replace a roller blind very quickly, without any effort.
Express delivery within 72 hours to your home address available.
